Full and reduced-order H∞ filtering of Takagi–Sugeno fuzzy time-varying delay systems: Input–output approach

This article addresses the issue of delay-dependent H_∞ filtering design for TakagiŮSugeno fuzzy time-varying delay systems using the input–output approach. A three-term approximation model has been used to transform the original system into two interconnected subsystems. Since the nonquadratic Lyapunov–Krasovskii functional requires to deal with the membership function's (MF) time derivative, upper-bound inequalities have been added to the obtained conditions. Based on the scaled small gain theorem, nonquadratic Lyapunov–Krasovskii functional approach and considering the bounds of the MF time-derivative, the H_∞ full- and reduced-order filters are designed and then formulated in terms of linear matrix inequalities. Finally, illustrative examples are presented to demonstrate the validity of the proposed methods.     

Dynamic load-altering attack detection based on adaptive fading Kalman filter in power systems

This paper presents an effective and feasible method for detecting dynamic load-altering attacks (D-LAAs) in a smart grid. First, a smart grid discrete system model is established in view of D-LAAs. Second, an adaptive fading Kalman filter (AFKF) is designed for estimating the state of the smart grid. The AFKF can completely filter out the Gaussian noise of the power system, and obtain a more accurate state change curve (including consideration of the attack). A Euclidean distance ratio detection algorithm based on the AFKF is proposed for detecting D-LAAs. Amplifying imperceptible D-LAAs through the new Euclidean distance ratio improves the D-LAA detection sensitivity, especially for very weak D-LAA attacks. Finally, the feasibility and effectiveness of the Euclidean distance ratio detection algorithm are verified based on simulations.     

一种新的多渐消因子容积卡尔曼滤波

将强跟踪思想引入容积卡尔曼滤波（cubature Kalman filter，CKF），建立强跟踪CKF能有效克服CKF在模型不确定、状态突变等情况下，滤波性能下降的问题。通过分析现有多渐消因子计算方法，发现它们均只利用了协方差矩阵的对角线元素，并没有考虑各个状态之间的相关性，不能充分发挥多渐消因子的优势。为此，本文提出渐消因子矩阵，基于正交原理推导渐消因子矩阵的求解方法，提出多渐消因子强跟踪CKF算法。多渐消因子强跟踪CKF算法突破了传统多渐消因子为向量的限制，也不再要求渐消因子取值要大于1。仿真验证了算法具有更好的滤波精度何鲁棒性，能更好的满足工程应用的要求。     

融合重检测机制的卷积回归网络目标跟踪算法

针对基于人工特征的背景感知相关滤波（CACF）算法在形变、运动模糊、低分辨率情形跟踪效果较差以及跟踪器遇到严重遮挡等情形容易陷入局部最优而导致跟踪失败的问题，提出一种融合重检测机制的卷积回归网络（CRN）目标跟踪算法。在训练阶段，将相关滤波作为CRN层融入进深度神经网络，使网络成为一个整体进行端到端训练；在跟踪阶段，通过残差连接融合不同网络层及其响应值，同时引入重检测机制使算法从潜在的跟踪失败中恢复，当响应值低于给定阈值时激活检测器。在数据集OTB-2013上的实验表明，所提算法在50个视频序列上精确度达到88.1%，相比原始CACF算法提高9.7个百分点，在具有形变、运动模糊等属性的视频序列上相比原始算法表现更优秀。     

Kalman filter based production control of a failure-prone single-machine single-product manufacturing system with imprecise demand and inventory information

An adaptive production control structure for failure-prone manufacturing systems under inventory and demand uncertainty is proposed. It contains estimation and forecasting modules incorporated into a control loop. The customer demand is unknown and its rate is composed of ramp-type, seasonal and random components. Information available to decision maker consists of imprecise inventory records, and the Kalman filter technique is used for estimating the inventory level and demand rate online from noisy inventory measurements. Estimates obtained are shown to converge to the actual values in stochastic sense. They are subsequently used for demand component forecasting, once the estimation errors become sufficiently small. A forecasting algorithm allows estimating ramp-type and seasonal demand components, together with their potential errors. Obtained estimates are incorporated into production control procedures, recently developed for manufacturing systems under variable and uncertain demand. Optimality conditions in the form of Hamilton-Jacobi-Bellman equations are obtained. A constructive numerical method for computing sub-optimal production policies is proposed and validated through numerical simulations.     

Development of a fast atom beam gun for surface-activated bonding

Surface-activated bonding (SAB), also called room-temperature bonding, is used in three-dimensional integration technology for semiconductor devices. An Ar fast atom beam (FAB) is used for SAB. However, conventional FAB guns must be replaced after hundreds of minutes of irradiation because carbon abrasion powders are generated by Ar ions sputtering in the gun. Therefore, this study develops a novel FAB gun with improved lifetime. The proposed FAB gun applies magnetic fields to guide Ar ions to reduce sputtering in the gun and improve irradiation efficiency. The proposed FAB gun indicates the possibility of improving gun lifetime.     

面向长距离量子通信的双光子关联成像技术

量子时域鬼成像利用光子对的时间-频率关联性实现了50km光纤链路上的图像传送,有望应用于量子通信的协议中。然而,现有方案的成像质量较差,成像速度较慢,因此其应用性在一定程度上受到了限制。文章对已有成像方案进行了较大的改进,利用可编程滤波器数字设定待成像信息,进而实现了二维图像信息的自动化实时传送。实验结果证明,改进方案的成像质量和速度均有显著改善,有利于推动量子关联成像在量子通信领域的应用。     

基于多尺度结构特征的快速异源图像匹配

针对异源图像提出一种基于多尺度密集结构特征的快速匹配算法。算法首先利用Gabor滤波器逐像素提取图像中的结构响应,再根据主方向响应对多尺度结构特征融合,然后使用快速傅里叶变换在频域计算各特征分量图像之间的卷积,最后将卷积生成的系数矩阵求和计算出图像之间的相似性并选择相似性最大位置作为匹配结果输出。本文算法能有效适应异源图像间的非线性灰度变化和噪声干扰问题。测试使用可见光、红外、雷达图像组成的异源图像数据集对本文算法和现有算法进行测试比较,结果表明:本文算法的平均误匹配率最低,并且计算速度有明显优势。     

Copy-move forgery detection of duplicated objects using accurate PCET moments and morphological operators

This paper presents a new method for copy-move forgery detection of duplicated objects. A bounding rectangle is drawn around the detected object to form a sub-image. Morphological operator is used to remove the unnecessary small objects. Highly accurate polar complex exponential transform moments are used as features for the detected objects. Euclidian distance and correlation coefficient between the feature vectors are calculated and used for searching the similar objects. A set of 20 forged images with duplicated objects is carefully selected from previously published works. Additional 80 non-forged images are edited by the authors and forged by duplicating different kinds of objects. Numerical simulation is performed where the results show that the proposed method successfully detect different kinds of duplicated objects. The proposed method is much faster than the previously existing methods. Also, it exhibits high robustness to various attacks such as additive white Gaussian noise, JPEG compression, rotation, and scaling.     

板框式压滤机在煤矿清挖水仓中的应用

煤矿每年雨季前都要清挖一次水仓淤泥,传统的人工清挖方式需要职工下到水仓底部,将底部沉淀物连同污水一并装入矿车,工作效率低,劳动强度大。利用板框式压滤机在矿井中直接将水仓污水中的煤泥压滤成饼状输送至地面,可节省人员,消除安全隐患,减少矿车运输,降低生产成本。